Kinook Software Forums

Go Back   Kinook Software Forums > Visual Build Professional > [VBP] Third Party Tools

Reply
 
Thread Tools Rate Thread Display Modes
  #1  
Old 05-07-2008, 01:41 PM
MHorn MHorn is online now
Registered User
 
Join Date: 05-07-2008
Posts: 2
exit code -1073741819 with Visual DSP++

I've read several threads dealing with the "exit code -1073741819" problem but most of them seem to be related to compliling with Installshield or VB6.

We're using Visual DSP++ from Analog Devices.

All I'm attempting to do is automate the launching of the Visual DSP IDE. I just want the program to load.

I'm using the "Run Program" action in VBPro version 6.7 and every time I attempt to initiate the Visual DSP IDE, I get the message -
"Process completed with exit code -1073741819" and the IDE never comes up.

The strange thing is, this only happens with Visual DSP 5.0. I can successfully launch Visual DSP 4.0 and 4.5 using the same command. Is there anything I can do to get around this? Is this an issue I need to take up with Analog Devices?

Thanks

Last edited by MHorn; 05-07-2008 at 06:50 PM.
Reply With Quote
  #2  
Old 05-07-2008, 01:57 PM
kinook kinook is online now
Administrator
 
Join Date: 03-06-2001
Location: Colorado
Posts: 5,723
Try removing the VBP DEP exclusions (Control Panel -> System -> Advanced -> Data Execution Prevention -> Turn on DEP for all programs and services except those I select, Remove Visual Build Professional and Visual Build Professional 6 Console App from the list, OK, and restart Windows) and then configure Windows to 'Turn on DEP for essential Windows programs and services only' (in that same dialog) and restart again.
Reply With Quote
  #3  
Old 05-07-2008, 02:32 PM
MHorn MHorn is online now
Registered User
 
Join Date: 05-07-2008
Posts: 2
That fixed it.

Thank you VERY much!!!
Reply With Quote
  #4  
Old 08-06-2008, 12:38 PM
Liafo Liafo is online now
Registered User
 
Join Date: 08-05-2008
Posts: 1
Thanks for this information. I had the same problem with Robo Help 7 (the same exit code in Visual Builder Pro 6 when running RoboHelp step) and after this DEP "fix" it works fine.
Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



All times are GMT -5. The time now is 03:49 PM.


Copyright 1999-2019 Kinook Software, Inc.