Kinook Software Forums

Go Back   Kinook Software Forums > Visual Build Professional > [VBP] General Discussion

Reply
 
Thread Tools Rate Thread Display Modes
  #1  
Old 09-22-2016, 10:07 AM
ahouriet ahouriet is online now
Registered User
 
Join Date: 09-26-2008
Posts: 5
Error with get after HTTP post

We are using a POST command to upload a file and send some other properties to our server, over https. We get the result back into a macro for later use.

This has been working in an older version of VBPro, I'm pretty sure it was an 8.x version.

It looks like the latest version we have (9.2) throws an error on this step after everything completes: "Error getting data: Invalid handle passed to function".

Here's a truncated log of the process, I chopped out a lot of the inner transfer entries:

Code:
Connecting to HTTPS server 'xxxx.xxxxx.xxxxxx' on port 443
Filename.zip -> /buildapi/build/createversion?build_key=3WCN6-7QRER-7N254-QLG3E-6DP6L-5&version_id=66&product_id=6&version=4.0.13&release_notes=release notes text&send_emails=true
VISBUILDPRO 1408 0000 INF: started thread 0x1408 trace on 09-22-2016 09:24:33 Windows x86-6.1.7601 [8.0.8050.2538]
VISBUILDPRO 1408 0010 INF: getaddrinfo(0x440f450 [licensing.smdinc.net], 0x0 [], 0x440f140, 0x440f13c) returned 0
VISBUILDPRO 1408 0000 INF: socket(2, 1, 6) returned 1296
VISBUILDPRO 1408 0000 INF: ioctlsocket(1296, 0x8004667e, 0x440f18c) returned 0
VISBUILDPRO 1408 0010 WRN: connect(1296, 0x440f198 [198.50.196.80]:443, 16) returned -1 [10035]
VISBUILDPRO 1408 0030 INF: ioctlsocket(1296, 0x8004667e, 0x440f18c) returned 0
VISBUILDPRO 1408 0000 INF: send(1296, 0x231f38, 48, 0) returned 48
VISBUILDPRO 1408 0040 INF: recv(1296, 0x7ba0058, 65536, 0) returned 4412
VISBUILDPRO 1408 0000 INF: send(1296, 0x3370ef8, 340, 0) returned 340
VISBUILDPRO 1408 0040 INF: recv(1296, 0x7ba0058, 65536, 0) returned 75
VISBUILDPRO 1408 0010 INF: send(1296, 0x7c82f68, 373, 0) returned 373
VISBUILDPRO 1408 0000 INF: Encrypted buffer of 344 bytes
VISBUILDPRO 1408 0000 INF: send(1296, 0x7c84ff8, 181, 0) returned 181
VISBUILDPRO 1408 0000 INF: Encrypted buffer of 154 bytes
VISBUILDPRO 1408 0000 INF: send(1296, 0x7c82ff0, 29, 0) returned 29
VISBUILDPRO 1408 0000 INF: Encrypted buffer of 2 bytes
VISBUILDPRO 1408 0000 INF: send(1296, 0x7c82ff0, 269, 0) returned 269

/// lots of lines removed here... 

VISBUILDPRO 1408 0000 INF: Decrypted buffer of 1 bytes
VISBUILDPRO 1408 0000 INF: Decrypted buffer of 1 bytes
VISBUILDPRO 1408 0000 INF: Decrypted buffer of 1 bytes
VISBUILDPRO 1408 0000 INF: Decrypted buffer of 1 bytes
VISBUILDPRO 1408 0000 INF: Decrypted buffer of 1 bytes
VISBUILDPRO 1408 0000 INF: Decrypted buffer of 1 bytes
VISBUILDPRO 1408 0000 INF: Decrypted buffer of 1 bytes
VISBUILDPRO 1408 0000 INF: ioctlsocket(1296, 0x8004667e, 0x440efa0) returned 0
VISBUILDPRO 1408 0000 INF: Decrypted buffer of 4 bytes
VISBUILDPRO 1408 0000 INF: ioctlsocket(1296, 0x8004667e, 0x440f064) returned 0
VISBUILDPRO 1408 0000 INF: send(1296, 0x75433b8, 29, 0) returned 29
VISBUILDPRO 1408 0010 INF: closesocket(1296) returned 0

Error getting data: Invalid handle passed to function
From the server side everything seems fine, the file makes it, the data is all there, no errors logged, etc. It seems like VBPro just thinks something went wrong.

Is there any other data/info I can provide to assist?

Thanks,
Andy
Reply With Quote
  #2  
Old 09-22-2016, 10:30 AM
kinook kinook is online now
Administrator
 
Join Date: 03-06-2001
Location: Colorado
Posts: 5,656
When using a Put of 'Post file' along with a Get, these are two separate server calls (only with 'Post form data' and Get is the response from the post request captured in a single server call). This was the case even in v8, but there is a problem with this combination of commands in v9, because the connection is not kept open in between, so it's not valid when it tries to get. To resolve, you can just put these in separate HTTP steps (or skip the get if not needed).
Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



All times are GMT -5. The time now is 06:39 PM.


Copyright 1999-2019 Kinook Software, Inc.