Kinook Software Forum

Go Back   Kinook Software Forum > Ultra Recall > [UR] General Discussion

Reply
 
Thread Tools Rate Thread Display Modes
  #1  
Old 04-18-2007, 11:51 AM
janrif janrif is offline
Registered User
 
Join Date: 07-08-2005
Location: Ridgefield CT USA
Posts: 852
Search How To

I want to set up a quick search for contact "x". But instead of searching my entire the entire db, I want to limit the search to the contact branch. I know this option can be done in the advanced search dialog but but I'd like to be able to click on this search item & have URp automatically hoist the contacts branch & conduct a search based on my input.

Doesn't look like that's possible but I could have missed something. Might be a nice option to have a few more search properties to allow this sort of thing. Shouldn't be too difficult I would think. Nothing is difficult if you're not a programmer.
Reply With Quote
  #2  
Old 04-18-2007, 12:10 PM
quant's Avatar
quant quant is online now
Registered User
 
Join Date: 11-30-2006
Posts: 967
- create new search
- link your contacts directory to it
- set to limit search to siblings
- put your search among favorites
- set your favorites to start hoisted
Reply With Quote
  #3  
Old 04-18-2007, 12:18 PM
janrif janrif is offline
Registered User
 
Join Date: 07-08-2005
Location: Ridgefield CT USA
Posts: 852
Quote:
Originally posted by quant
- create new search
- link your contacts directory to it
- set to limit search to siblings
- put your search among favorites
- set your favorites to start hoisted
Where are you getting "- set to limit search to siblings" from? I must be missing something.
Reply With Quote
  #4  
Old 04-18-2007, 12:28 PM
quant's Avatar
quant quant is online now
Registered User
 
Join Date: 11-30-2006
Posts: 967
Quote:
Originally posted by janrif
Where are you getting "- set to limit search to siblings" from? I must be missing something.
when you create search item somewhere in the data explorer

If you create search in the Search pane, the third option reads "limit ... selected in Data explorer"
Reply With Quote
  #5  
Old 04-18-2007, 01:33 PM
janrif janrif is offline
Registered User
 
Join Date: 07-08-2005
Location: Ridgefield CT USA
Posts: 852
Quote:
Originally posted by quant
- create new search
- link your contacts directory to it
- set to limit search to siblings
- put your search among favorites
- set your favorites to start hoisted
I don't think this works the way I had it in my mind.

If I happen to be focused somewhere else, URp does not shift focus automatically to appropriate branch (in my casse, contacts) to limit the search. Where ever I am focused is where the search will occur.

But it's common knowledge that I've been wrong before so.....
Reply With Quote
  #6  
Old 04-18-2007, 01:42 PM
quant's Avatar
quant quant is online now
Registered User
 
Join Date: 11-30-2006
Posts: 967
Quote:
Originally posted by janrif
I don't think this works the way I had it in my mind.

If I happen to be focused somewhere else, URp does not shift focus automatically to appropriate branch (in my casse, contacts) to limit the search. Where ever I am focused is where the search will occur.

But it's common knowledge that I've been wrong before so.....
The first step is "create search item somewhere in your data explorer", not in Search pane!

I assumed this was obvious from the third step, cause you can limit search to siblings only if your search item is in Data explorer.

I believe the steps should do what you expect ... if I understood you correctly ...
Reply With Quote
  #7  
Old 04-18-2007, 04:05 PM
janrif janrif is offline
Registered User
 
Join Date: 07-08-2005
Location: Ridgefield CT USA
Posts: 852
Quote:
Originally posted by quant
The first step is "create search item somewhere in your data explorer", not in Search pane!

I assumed this was obvious from the third step, cause you can limit search to siblings only if your search item is in Data explorer.

I believe the steps should do what you expect ... if I understood you correctly ...
I think I'm missing something as usual.

My steps:
(1) focus on Contacts in Explorer
(2) <CTRL><SHT>+F = quick search
(3) copy/paste "quick search" in search pane & rename it "idiot"
(4) with focus still on contacts, <ALT>+L drop on "idiot" creating a child branch of "contacts"
(4) <ALT>+F1 = add to favorites
(5) move focus away from "contacts"
(6) click on favorite "idiot"
(7) search does not search "contacts"

What am I missing?
Reply With Quote
  #8  
Old 04-18-2007, 04:18 PM
quant's Avatar
quant quant is online now
Registered User
 
Join Date: 11-30-2006
Posts: 967
you are creating Search item in Search pane in the 2nd and 3rd step, it wont work there! The search item has to be somewhere in the Data Explorer pane, otherwise the third option of the search item wont be "limit ... to SIBLINGS" ...

The easiest is if you directly place your new search item into contact directory. But this might not be nice ... so you can have a directory in the Data Explorer pane where you will store some of your favorite searches (as opposed to storing them in the Search Pane). In this way you can use the "sibling feature", if you then link the directory that you want to search in ...

it's not very nice, believe it or not, I wanted to do sth similar some time ago as well, and suggested to kinook that the third option of the Search item should be somehow customizable, cause once you have a search item in the Search pane, you loose the "sibling feature" ...
Reply With Quote
  #9  
Old 04-18-2007, 04:28 PM
$bill $bill is online now
Registered User
 
Join Date: 09-14-2006
Posts: 210
Quote:
Originally posted by janrif


What am I missing?
Coming in late here...If I understood what you wanted to do...

Try this
(1) focus on Contacts in Explorer
2. tree/insert/ sibling/ search or <shift> <alt> <ins> s
3. Name the search
4. In the search box -check the box "limit search to siblings of current search item
5. create favorite

Try it....

Addendum I see quant's later post...suggesting the same thing I think...



Last edited by $bill; 04-18-2007 at 04:42 PM.
Reply With Quote
  #10  
Old 04-18-2007, 04:39 PM
janrif janrif is offline
Registered User
 
Join Date: 07-08-2005
Location: Ridgefield CT USA
Posts: 852
Quote:
Originally posted by quant
you are creating Search item in Search pane in the 2nd and 3rd step, it wont work there! [snip] once you have a search item in the Search pane, you loose the "sibling feature" ...
Now I got it, i.e. create a search item in Explorer. That works. Thanks.

This is very weird. What the heck is the search function "limit search to siblings"? One would think (or at least I did) that this was the secret. Hmmmm. Very strange....
Reply With Quote
  #11  
Old 04-18-2007, 04:52 PM
$bill $bill is online now
Registered User
 
Join Date: 09-14-2006
Posts: 210
The use of this technique was illustrated in the GTD sample database...

I find myself revisiting those samples from time to time to see what I missed as my understanding grows...
Reply With Quote
  #12  
Old 04-18-2007, 05:03 PM
quant's Avatar
quant quant is online now
Registered User
 
Join Date: 11-30-2006
Posts: 967
I dont know if this is good place, but I have a suggestion:

please add this option for Search items:
limit search to CHILDREN (recursively, just like siblings)

or customize the current one ... so that SIBLINGS can be changed to CHILDREN

USE:
in this way, one is not forced to create search inside the directory where one wants to limit the search to siblings. Instead, one can have search item anywhere in the Data explorer, and links the directory to the Search item.
(This can be done at the moment as well is one creates empty directory (for each such Search item) and places the search item in there)

Thanks
Reply With Quote
  #13  
Old 08-22-2008, 10:38 AM
MrAnalogy MrAnalogy is online now
Registered User
 
Join Date: 02-18-2007
Location: Blacksburg, VA
Posts: 56
How do you "link an item/directory" to a query?

Quote:
Originally posted by quant
- create new search
- link your contacts directory to it
- set to limit search to siblings
- put your search among favorites
- set your favorites to start hoisted
Reply With Quote
  #14  
Old 08-22-2008, 10:58 AM
quant's Avatar
quant quant is online now
Registered User
 
Join Date: 11-30-2006
Posts: 967
drag and drop, by default UR creates logical links

But as you asked the similar question elsewhere, this is now not the best way to do, cause one can use the relationship search
Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



All times are GMT -5. The time now is 09:08 PM.


Copyright © 1999-2023 Kinook Software, Inc.