Kinook Software Forum

Go Back   Kinook Software Forum > Visual Build Professional > [VBP] Third Party Tools

Reply
 
Thread Tools Rate Thread Display Modes
  #1  
Old 11-14-2007, 12:01 PM
John Kerr John Kerr is online now
Registered User
 
Join Date: 08-17-2006
Posts: 10
FTP and rcmd

Is there a way to use the ftp action to run remote commands on another system? The only actions that I see as available within the ftp action are get, put and list. I have gotten around this by using vbscript in VBP to run rcmd commands on the remote system but can't seem to find a good way to error trap. Just trying to find a better way to catch errors when using ftp rcmd.
Reply With Quote
  #2  
Old 11-14-2007, 01:19 PM
kinook kinook is online now
Administrator
 
Join Date: 03-06-2001
Location: Colorado
Posts: 6,034
No (I'm not familiar with "ftp rcmd" and it doesn't appear to be part of the FTP RFC -- is it specific to some FTP server?). Typically the Telnet action is used to execute commands on remote non-Windows (and non-LAN-accessible Windows) machines, and the Run Program action's Remote tab (PsExec) is used to execute commands on remote LAN-accessible Windows machines.
Reply With Quote
  #3  
Old 11-14-2007, 04:17 PM
John Kerr John Kerr is online now
Registered User
 
Join Date: 08-17-2006
Posts: 10
Ah, yes. Sorry but the rcmd is specific to the IBM iSeries systems. Have any familiarity with iSeries? I tried the tenet action but am unable to get passed the login to the system. The Username and Password field do not successfully log into a user profile so I tried to script it but I cannot seem to find the synatx for it. I get the user name in but I can't seem to get a password accepted. Looks as though the iSeries wants the user and password on the same line.
Reply With Quote
  #4  
Old 11-14-2007, 04:31 PM
kinook kinook is online now
Administrator
 
Join Date: 03-06-2001
Location: Colorado
Posts: 6,034
I had never heard of IBM iSeries before now. I take it that it does have a Telnet server? Please ZIP and send support@kinook.com:
1) The info from Help | About | Install Info
2) The .bld file
3) A build log file, with the Telnet action Logging field set to All + hex dump

Thanks.
Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



All times are GMT -5. The time now is 06:20 PM.


Copyright © 1999-2023 Kinook Software, Inc.