Kinook Software Forum

Go Back   Kinook Software Forum > Ultra Recall > [UR] General Discussion
FAQ Community Calendar Today's Posts Search

Reply
 
Thread Tools Rating: Thread Rating: 6 votes, 5.00 average. Display Modes
  #1  
Old 01-09-2008, 11:18 PM
armsys armsys is online now
Registered User
 
Join Date: 12-19-2007
Posts: 647
UR vs AskSam

Can anyone enumerate the differences between the two products? Does anyone have the user experience with AskSam? Can you share with us please?

Armstrong
Reply With Quote
  #2  
Old 01-10-2008, 09:43 AM
ashwken ashwken is offline
Registered User
 
Join Date: 10-16-2005
Location: Blairsville, GA USA
Posts: 431
Back in 2005 when I was evaluating this type of program I took a look at AskSam.

Although the program seemed capable I was put off by the price ($100+) and the fact that it did not support any type of Forms - except a free-form "Form" in the rtf editor, which may be a suitable solution for some, but it was not what I was looking for.

Then I took a look at Treepad and settled on the Business Edition ($40-50), which has a lot going for it - templates, clones, decent output options, and support for simple xml forms. But there were other needs which it did not address and the xml forms lack elegance, which brought me back to UR - something that I had investigated before settling on Treepad.

I realized that UR was probably going to meet the greatest number of my needs (and I realized that a database solution was preferable to an xml (text) solution), and was ready to bite-the-bullet on price ($90), when it became available at a discount at Bits du Jour (http://bitsdujour.com/).

Just my 2-cents.
Reply With Quote
  #3  
Old 01-10-2008, 12:20 PM
Jon Polish Jon Polish is online now
Registered User
 
Join Date: 07-21-2006
Posts: 391
I use askSam and have built very large knowledge bases and information stores using it. The program is worth learning and it certainly has its quirks, but searching (either simpe or complex) is very fast. Importing, exporting and reporting are also fast (speed in my opinion is NOT one of UR's strengths), but I have found importing to be unreliable. Version 6 introduced "folders" but these are not what one would commonly understand. The "folder" tree is not able to be manipulated, so for me there is no functional improvement over version 5. There have been reports of the folder display producing some instabilities. Tech support via the askSam forum is, well just go there and see for yourself.

There is no cloning, and the interface is rather dated. Version 7 improves on the interface, but I don't see anything that would compel me to return to using the program on a daily basis.

InfoSelect comes close to UR and tremendously surpasses it in speed, but it has bugs and the developers are unresponsive. InfoSelect also is quirky and relies on system RAM for database storage which is another story. I do like it though.

By the way, both of these programs date back to the DOS days (and it shows).

Jon

Last edited by Jon Polish; 01-10-2008 at 07:50 PM.
Reply With Quote
  #4  
Old 01-10-2008, 06:20 PM
dasymington dasymington is online now
Registered User
 
Join Date: 06-15-2005
Posts: 287
I used AskSam before switching to UR. It was UR's logical linking - the ability to explicitly group items into folders and a tree structure, rather than just relying on searches pulling them together - that made me switch.

The only thing I miss from AskSam is its very logical method of searching; UR's is a bit quirky - to say the least.
Reply With Quote
  #5  
Old 01-10-2008, 06:30 PM
armsys armsys is online now
Registered User
 
Join Date: 12-19-2007
Posts: 647
Hi Jon & ashwken & dasymington,
Many thanks for sharing your valuable personal experiences on AskSam. At least, Kinook now may consider some search optimization and speed enhancment.
Thank you again.
Armstrong

Last edited by armsys; 01-10-2008 at 06:32 PM.
Reply With Quote
  #6  
Old 01-10-2008, 11:22 PM
wordmuse wordmuse is online now
Registered User
 
Join Date: 10-11-2006
Posts: 482
I used Asksam for just a little bit and found its non-structured approach to be a bit too wide open for me.

I also used to be a real fan of Info Select. In fact, I first bought it when it was called Tornado and competed with products like Borland's Sidekick.

In its prime, IS was a truly one-of-a-kind, superb program.

But over the years, I guess its legacy became something of a burden and I stopped using it at version 7.

For awhile, I used Keynote. A superb program for its time, and it was free. In fact it's still available, I believe.

But the developer moved on to other things. Having purchased two of Kinook's competitors products (MyInfo and MyBase), I have settled on URP3. The other two have things I wish UPR3 had (the way that tags are implemented in MyInfo, for example). But URP3 beats all of them (IMHO) overall. And Kinook's been incredibly responsive to we users.

I know this goes way astray of your original question. Somewhere in the mix, I think I provided some kind of answer.

Regards,
Bal
Reply With Quote
  #7  
Old 01-11-2008, 05:58 PM
dmahling dmahling is online now
Registered User
 
Join Date: 09-01-2006
Location: boston
Posts: 26
dont forget ECCO

I used AskSam, InfoSelect, and ECCO.

In my book UR surpasses both AskSam and Infoselect. It is cleaner, has a modern UI, sync with Outlook, web-integration, etc. ECCO's fully object oriented model still stands by itself, though the features, not updated for a decade now, are no longer what is needed in a web, XML, etc, world.
Reply With Quote
  #8  
Old 01-12-2008, 05:16 PM
StephenUK StephenUK is online now
Registered User
 
Join Date: 07-31-2006
Location: UK
Posts: 143
I agree that the lack of hierachy makes askSam frustrating. I never liked it for that reason and was an avid InfoSelect user for too many years to admit.

Now I sit on the fence and use both URP and IS. (And ListPro).

I like IS because:

- it is fast and very stable
- I can very easily create new directories (topics in IS) and notes at the point I want in the tree. (UR places things at the bottom which is most irritating, and has no simple one letter command for creating new directories).
- searching is easier with excellent boolean searches too.

But UR is gaining ground with me because:

- it is much better with web capture. (But it would be better still if it matched Web Research which is truly superb at doing that).
- it stores pdfs, something which for me is vital
- the favorites options and hoisting are truly excellent and made Verson 3 a major improvement.

In my view IS failed to realise until far too late that data was increasingly NOT just text based.

Neither of the programs implement thumbnails effectively. For that, one has to look at Paperport. It produces excellent thumbnails of Word and Excel documents and of photos and other media. UR is pretty useless at storing photos. Why? After all, it aims to store EVERYTHING, so why not get to grips with photos?

Now if UR could do the above and match WebResearch for webcapture, (and allow me to create directories at the point I am working in the tree) then I would truly like it.

Of all the similar products on the market UR is the best, but it could be much better.

If only Microsoft had purchased InfoSelect ten years ago we might by now have some really good products. As it is, Microsoft concentrates on all the wrong problems.... despite purchasing Lotus Notes. (Which never quite worked for individual users either).

As for OneNote, the lack of any sensible tree structure, and the concentration on character recognition at the expense of more useful functionality, makes it a major disappointment that may only become a threat to UR in several versions time.
Reply With Quote
  #9  
Old 01-12-2008, 10:20 PM
armsys armsys is online now
Registered User
 
Join Date: 12-19-2007
Posts: 647
Quote:
Originally posted by StephenUK
Neither of the programs implement thumbnails effectively. For that, one has to look at Paperport. It produces excellent thumbnails of Word and Excel documents and of photos and other media. UR is pretty useless at storing photos. Why? After all, it aims to store EVERYTHING, so why not get to grips with photos?
Actually you can view photos in UR provided:
1. you set the URL of the UR folder to the Windows folder containing photos;
2. In Tools | Options |Browser, include *Folder in "File Extensions to display in internal browser view:"
You'll be surprised by the the image display speed in UR when compared with PaperPort. Of course, thumbnails of .max files aren't supported in Windows Explorer. Are you satisifed with searching speed in PaperPort?

Armstrong
Reply With Quote
  #10  
Old 01-13-2008, 06:21 AM
quant's Avatar
quant quant is online now
Registered User
 
Join Date: 11-30-2006
Posts: 967
Quote:
Originally posted by armsys
Actually you can view photos in UR provided:
1. you set the URL of the UR folder to the Windows folder containing photos;
2. In Tools | Options |Browser, include *Folder in "File Extensions to display in internal browser view:"
but this displays thumbnails of EXTERNAL files, not of much use really ...
What we need is a "thumbnail view" in the child items pane ...
Reply With Quote
  #11  
Old 01-13-2008, 10:21 AM
StephenUK StephenUK is online now
Registered User
 
Join Date: 07-31-2006
Location: UK
Posts: 143
Thumbnails

Armstrong. Yes, this does work quite well for a single directory. Indeed, Kyle kindly suggested this some months ago.

I agree with Quant that photos need ideally to be stored within the program to be consistent with the approach used for other data.

The particular problem I have is that:

- the directory structure where I hold the photos changes quite frequently and is several layers deep. If I import the parent directory, and represent it as a directory in UR, the files in that parent directory display nicely as thumbnails and do, as you say, load very quickly. But if I want to drill down to a sub directory I am just taken to Windows Explorer.

I can, of course, laboriously recreate my Windows Explorer directory structure I use for my photos in UR one directory at a time. But with perhaps 100 directories, and no way to synchronise the directory structure, it is a tedious process both to create and to maintain.

So I would suggest the value of internal thumbnails, or, if that is difficult to achieve, some way of quickly reproducing part of the Windows explorer tree in the UR tree with a means of synching the two. (I can't think that would be so difficult in programming terms).
Reply With Quote
  #12  
Old 01-13-2008, 10:41 AM
armsys armsys is online now
Registered User
 
Join Date: 12-19-2007
Posts: 647
Re: Thumbnails

Quote:
Originally posted by StephenUK
- the directory structure where I hold the photos changes quite frequently and is several layers deep. If I import the parent directory, and represent it as a directory in UR, the files in that parent directory display nicely as thumbnails and do, as you say, load very quickly. But if I want to drill down to a sub directory I am just taken to Windows Explorer.
Not sure if I understand your situation correctly. The sub-folders can be synchronized automatically by Ctrl+F5, isn't it? The entire Windows sub-folder strucutre can be cloned into UR's Data Explorer.
Armtrong
Reply With Quote
  #13  
Old 01-13-2008, 10:49 AM
StephenUK StephenUK is online now
Registered User
 
Join Date: 07-31-2006
Location: UK
Posts: 143
Thumnails

Armstrong

I think I'm missing something. Thank you for the feedback. How do I clone the directory structure? Can I also update that structure using Ctrl f5?

This would all help me no end. Maybe it's another case of UR being able to do things if only one knew...
Reply With Quote
  #14  
Old 01-13-2008, 11:34 AM
armsys armsys is online now
Registered User
 
Join Date: 12-19-2007
Posts: 647
StephenUK,
For details, see http://www.kinook.com/UltraRecall/Ma...nchronize.htm.
The URL of the parent folder in UR must pont to an actual Windows folder. The folder structure sychronization with the Data Explorer is automatically done by UR by pressing Ctrl+F5.

Armstrong
Reply With Quote
  #15  
Old 01-13-2008, 11:47 AM
armsys armsys is online now
Registered User
 
Join Date: 12-19-2007
Posts: 647
Hi StephenUK,
The Windows folder structure cloning is automatically performed by UR. Assuming you're interested in cloning the structure of C:\Windows\System32:
1. Press Alt+Ins, select folder;
2. Select the newly created folder Info Item, press F2 it to rename to "System32";
3. In the System Attribute pane, press Ins;
4. In Insert Item Attribute dialog window, in the Name field, type URL and press Enter;
5. Back to the System Attribute pane, in the URL field, type "C:\Windows\System32";
6. Back to the Data Explorer, select System32 Info Item, and press Ctrl+F5.
UR will automatically create the folder structure as shown in the screen shot below.
Armstorng
Attached Images
 

Last edited by armsys; 01-13-2008 at 11:53 AM.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



All times are GMT -5. The time now is 06:35 PM.


Copyright © 1999-2023 Kinook Software, Inc.